![Is my bed too hot? Bottom warped on this print, PETG Geeetech filament at 220C nozzle, 90C bed on a Sovol SV06. I'm a newbie still trying to find the right temps : Is my bed too hot? Bottom warped on this print, PETG Geeetech filament at 220C nozzle, 90C bed on a Sovol SV06. I'm a newbie still trying to find the right temps :](https://preview.redd.it/is-my-bed-too-hot-bottom-warped-on-this-print-petg-geeetech-v0-grbea6nejuea1.jpg?width=640&crop=smart&auto=webp&s=f514b9be418ae3a13eba9f4b0f234569c7fe8477)
Is my bed too hot? Bottom warped on this print, PETG Geeetech filament at 220C nozzle, 90C bed on a Sovol SV06. I'm a newbie still trying to find the right temps :
![Is my bed too hot? Bottom warped on this print, PETG Geeetech filament at 220C nozzle, 90C bed on a Sovol SV06. I'm a newbie still trying to find the right temps : Is my bed too hot? Bottom warped on this print, PETG Geeetech filament at 220C nozzle, 90C bed on a Sovol SV06. I'm a newbie still trying to find the right temps :](https://i.redd.it/is-my-bed-too-hot-bottom-warped-on-this-print-petg-geeetech-v0-n06t26nejuea1.jpg?width=3024&format=pjpg&auto=webp&s=b77be098f6cc5e6f494faed1d3c7e96a2e294b7c)
Is my bed too hot? Bottom warped on this print, PETG Geeetech filament at 220C nozzle, 90C bed on a Sovol SV06. I'm a newbie still trying to find the right temps :
![Dial Indicator and Bracket for Heated Build Bed Level Test | Airtripper's 3D Printer and Arduino Blog Dial Indicator and Bracket for Heated Build Bed Level Test | Airtripper's 3D Printer and Arduino Blog](http://web.bluecomtech.com/3D%20Printer%20and%20Arduino%20Blog/airtripper.com/wp-content/uploads/2012/11/3d-printer-hot-end-too-close-to-platform.jpg)
Dial Indicator and Bracket for Heated Build Bed Level Test | Airtripper's 3D Printer and Arduino Blog
![Heavy warping with PLA, even though bed is at 75°C. (Dolly Prusa clone, nozzle at 205). Problem seems to have appeared after about half of the print. : r/FixMyPrint Heavy warping with PLA, even though bed is at 75°C. (Dolly Prusa clone, nozzle at 205). Problem seems to have appeared after about half of the print. : r/FixMyPrint](https://i.redd.it/xi5wsjb7wyi01.jpg)